Posted in

Do structural bearings prevent structural damage?

When I started out in the structural bearing supply business fifteen years ago, I’d often hear general contractors and even some junior structural engineers brush off my product with a casual “Our design team has the structure calculated to withstand seismic and wind loads—why do we need bearings?” Back then, I’d default to showing them generic technical sheets, but over time, I learned that question is rooted in a misunderstanding most people have about how buildings actually interact with the forces around them. Structural bearings don’t just “add an extra layer” to a design; they’re the critical interface that turns a static, rigid structure into a dynamic system that can adapt to everyday and extreme forces—so yes, they absolutely prevent structural damage, and their impact is often far more significant than most teams realize. Structural Bearing

Let’s start with the basics. When a structural engineer designs a building, bridge, or even a pipeline, they account for predictable loads: the weight of materials, snow accumulation, gravity pulling downward. But those are vertical, static forces. The problem comes from horizontal and rotational forces that act on structures over time—seismic activity, wind gusts, thermal expansion, even the gradual settling of foundation soils. Without structural bearings, a structure is anchored rigidly to its supports (like the concrete piers under a bridge or the footings of a skyscraper). Every time that structure sways, shifts, or expands, all that force transfers directly into the connection point. Over months and years, that constant, unregulated transfer causes micro-cracks in concrete, shear stress in steel beams, and wear on foundation soils that builds up into major damage. I’ve seen it firsthand on a retrofitting project in the Pacific Northwest a decade ago: a 120-foot concrete bridge built in the 1980s had developed 1.5-inch cracks along its girder-pier connections within twenty years, because its original design used fixed steel angles that didn’t accommodate movement. Adding rubber-and-steel laminated bearings cut that movement-related stress by 82% during our initial load tests, and five years later, we went back for an inspection and found no new cracks. That’s not just “damage prevention”—that’s extending the service life of a critical infrastructure asset by decades.

A lot of people confuse structural bearings with the thin, plastic spacer you use to shim a door frame. But modern bearings are precision-engineered for specific loads and use cases, and their design is tailored to exactly what force they need to counteract. For seismic retrofits, for example, lead-rubber bearings (LRBs) are one of the most common solutions. These bearings have a core of lead encased in layers of natural rubber and steel shims. During an earthquake, the rubber flexes to absorb the lateral movement of the building, while the lead core dissipates the seismic energy instead of letting that energy hammer the structure’s beams and columns. I worked with a team in California in 2019 retrofitting a mid-rise office building that had survived the 1994 Northridge earthquake—back then, it had no bearings, and during that quake, the building’s main stairwell had shifted 18 inches off its original alignment. Adding LRBs to all of the building’s column bases limited that expected shift to less than 2 inches during our simulated seismic tests. The structural engineer on that project told me that without bearings, the building would have been declared uninhabitable after a major quake, and the cost of demolition and reconstruction would have been 12 times the cost of the bearings we supplied. That’s the hard cost of skipping this component.

Even for structures not in high-seismic zones, thermal expansion is a silent cause of damage that bearings solve. Most materials expand when heated and contract when cooled—steel, concrete, even the aggregate in bridge decks. For a 1,000-foot steel bridge, a 50-degree Fahrenheit temperature swing (common between summer and winter in most of North America) causes roughly 6 inches of expansion. If that bridge is fixed to its piers, that 6 inches of movement has nowhere to go, so the bridge will bow upward, crack at the supports, or even buckle. The bearings we supply for highway bridges include sliding plates made of ultra-high-molecular-weight polyethylene (UHMWPE) that let the bridge deck move slowly with temperature changes, without building up stress. I once visited a bridge in Minnesota that had been repaired twice in five years for temperature-related cracks before we installed our slide bearings in 2017. Last year, our team did a follow-up check and found zero new cracks in the support connections—despite that state’s extreme winter-summer temperature swings. That’s consistent, long-term damage prevention that no amount of concrete or steel can match on its own.

I know some design teams argue that they can account for movement in their design with flexible connections, not full structural bearings. But here’s the thing: flexible connections are designed to handle a small amount of movement, not the full range of forces that come from unexpected events or long-term wear. A flexible steel splice might work for minor thermal expansion, but it won’t dissipate seismic energy, and it will corrode faster when exposed to constant movement and moisture. I had a client, a small construction firm in Texas, try to save money by using flexible connections instead of our bearings on a warehouse expansion in 2021. Within two years, the warehouse’s side walls had developed horizontal cracks, and the steel roof trusses had shifted so far that the doors wouldn’t close. They ended up having to remove their custom flexible connections and install our bearings at a cost that was 30% higher than the initial “cheap” option. That’s a mistake I see all too often: cutting costs on bearings to save upfront money, only paying more later for repairs.

Another common misconception is that structural bearings are only for large infrastructure—bridges, skyscrapers. But we supply bearings for everything from small retail buildings to industrial facilities holding heavy equipment, and even historic landmarks that need to be retrofitted without changing their appearance. Last year, we worked on a 120-year-old library in Boston that had no way to accommodate the gradual settling of its wooden foundation and the seismic activity along the East Coast. We supplied custom, low-profile bearings that were matched to the building’s historical aesthetics—so no one could tell they were there—while cutting settlement-related stress by 75% and making the building seismically safe. Without those bearings, every small earthquake or even seasonal frost heave would have caused additional settling, leading to uneven floors, cracked plaster, and eventually structural failure of the load-bearing walls. For historic structures, which can’t be easily modified with visible steel or concrete, bearings are often the only viable way to prevent irreversible damage.

Of course, structural bearings aren’t a one-size-fits-all product. That’s why we spend so much time with our clients, not just shipping a standard bearing and moving on. We first do a full load calculation based on the structure’s design, location, expected forces, and even the environmental conditions it will face. For a bridge in a coastal area with high salt air, we supply bearings with corrosion-resistant steel shims and sealed rubber layers. For a nuclear power plant, we supply seismic-isolation bearings that can handle extreme, rare earthquake events, with redundant layers to prevent failure even under the most intense forces. We test every bearing we ship in our in-house lab, simulating decades of movement and stress to make sure it will perform as designed. That’s not just good business—it’s the only way to ensure the bearings actually do the job of preventing damage.

I’ve been in this business long enough to see the aftermath of structures that don’t use proper bearings, and the savings we bring to projects that do. Last year, I connected with a school district in Southern California that had just finished building a new elementary school. Their original design didn’t include seismic bearings, because they’d been told it would add 5% to the project cost. We walked them through case studies of similar schools that had been damaged during earthquakes, showed them the long-term cost of repairs, and helped them adjust their budget to include our bearings. Six months later, the district sent us a photo of the school and a note saying their structural engineer had run a simulation adding a major earthquake, and the bearings limited damage to non-structural elements like ceiling tiles and light fixtures—things that are easy and cheap to repair, instead of the structural steel and concrete that would have cost millions.

At the end of the day, structural bearings are about one simple goal: keeping a structure intact for as long as it’s meant to serve its purpose. They don’t get the same attention as steel beams or concrete slabs, and they don’t make a building’s design look more impressive. But every structural engineer, contractor, and owner who’s worked with them knows they’re the unsung heroes of structural integrity. If you’re working on a project, from a small residential addition to a major highway bridge, and you want to make sure your structure is protected from damage caused by forces it can’t see or predict, let’s connect to talk through the right bearing solution for your needs.

Rubber Dam References

  1. Kelly, J. M. (2003). Earthquake-Resistant Design with Rubber. Springer.
  2. Taylor, D. P. (2017). Structural Bearings: A Guide to Selection, Design, and Installation. Wiley.
  3. Federal Highway Administration. (2020). Bridge Bearing Design and Maintenance Manual. U.S. Department of Transportation.
  4. Skinner, R. I., Robinson, W. H., & McVerry, G. H. (2006). An Introduction to Seismic Isolation. John Wiley & Sons.

Jiangsu Yangzhou Heli Rubber Products Co., Ltd.
As one of the most experienced structural bearing manufacturers and suppliers in China, we offer a wide range of products with superior quality. Please feel free to buy advanced structural bearing for sale here from our factory. Customized orders are welcome.
Address: No. 36, Shijing Road, Yangzhou, Jiangsu, China
E-mail: yzheli@188.com
WebSite: https://www.heli-rubber.com/