Hey everyone, thanks for stopping by my corner of the blog today. If you’ve been in the plastic packaging or custom plastic parts game for even a minute, you’ve definitely heard of extrusion blowing machines—aka EB machines for short. I’m [just skip the company name, since I can’t use made-up ones], been supplying and troubleshooting these bad boys for over a decade now, and I work with shops of all sizes: small guys making food containers, mid-sized factories churning out pipes, even big brands doing industrial plastic drums. Most of the time these machines are a total workhorse, but no tool’s perfect, right? Today I wanna cut through the hype and talk about the real, tangible downsides I see day-to-day—stuff that actually makes my clients throw their hands up sometimes, not just vague “it’s expensive to run” nonsense. Let’s get into it. Extrusion Blowing Machine

First off, material waste is way more of a problem than most new operators realize, especially if you’re not running tight production schedules. Extrusion blowing works by melting plastic resin, forcing it through a die to make a tube (that’s the parison), then inflating it into a mold. The thing is, every time you change the mold for a new part shape—say, switching from a 1-gallon water jug to a 5-gallon bucket—you’ve gotta purge the machine of the old resin. Purge compound isn’t cheap, and if you’re switching between resin types (like HDPE to PP, two totally different plastics), you might waste 200 to 500 pounds of material just to get the blend consistent enough to avoid lumpy parts. I had a small packaging client last year that switched to custom cosmetic containers every 2 weeks, and they were blowing through $12k worth of resin and purge a year just on changeovers alone. And it’s not just changeovers: startup waste is real too. Every time you fire the machine up on a Monday morning after it’s been idle over the weekend, you’ve gotta run the first 15 to 30 minutes of parison to get the temperature and pressure right. If you’re running small batches (like a 500-part run instead of 10k), that startup waste can eat up 10-15% of the entire batch—total bummer when you’re working on thin margins.
Next up, the skill gap is way bigger than most people assume. A lot of new shops think “hey, it’s a machine, just flip it on and go” but no—running an extrusion blowing machine isn’t like pressing a button on a coffee maker. You need someone who can tweak parison thickness (the wall of that tube before it’s blown), adjust inflate pressure on the fly, fix warping mid-cycle, and troubleshoot things like parison sag (when the hot plastic tube droops before you inflate it) without calling a tech every hour. I see this all the time with startups that buy a cheap used machine to save cash, then can’t find a local operator. Last year a guy called me panicking because his operator quit after a week, and he was running 20% of his production due to constant mistakes. Even with a new EB machine, training takes at least 2-3 weeks of hands-on time, and if you can’t hire someone with that specific experience, you’re either paying through the nose for a temp or dealing with wasted parts for months. And don’t even get me started on part consistency if you don’t have a good operator—one small tweak to the extruder screw speed, and half your parts are too thin at the bottom and leak.
Speaking of costs, let’s talk about downtime and maintenance—because that’s a hidden killer of profitability. EB machines have a ton of moving parts: the extruder barrel, the die head, the blow pin, the mold clamps, the cooling system. Every single one of these needs regular, precise maintenance. If you skip monthly checks (like cleaning the die head to prevent resin buildup), you’re looking at unexpected downtime that can take half a day or longer. I had a client last quarter that ran his machine 24/7 to hit a holiday order deadline and skipped a $200 die head cleaning. The die got clogged, he had to take the machine down for 3 days, and missed his order window—cost him a $50k contract. Plus, parts for EB machines aren’t as cheap as they are for, say, an injection molding machine. Custom die heads, for example, can run $5k to $15k, and lead times are 4-6 weeks. If a die breaks mid-run, you’re stuck waiting, and if you’re in a rush, you might have to pay expedited fees just to get a replacement. Also, energy use is a big one—extrusion blowing machines need to heat resin to 300-500°F, so they guzzle electricity or natural gas. A mid-sized machine uses $15k to $20k a year in energy costs, and if your shop is in a state with high utility rates, that number jumps. I worked with a client in California last year that saw their energy bill go up 25% when they added a second EB machine, and they almost had to scale back production because they didn’t factor that in.
Then there’s part design limitations, which I see new clients underestimate hard. EB works by inflating a parison into a mold, right? That means parts have to have uniform wall thickness, or at least thickness that’s achievable with die and inflate adjustments. You can’t make parts with really deep, narrow recesses—like, say, a plastic cup with a tiny handle indent at the bottom—because the plastic won’t stretch evenly in that spot. I had a client that wanted to make a custom tool holder with a deep, narrow cavity, and we had to tell him he’d have to go with a different process, like thermoforming, because EB would result in a part that’s way too thin in that recess and prone to cracking. Also, undercuts—those little notches or bumps that make parts snap together—are basically impossible with extrusion blowing. If your part has an undercut, you need a collapsible mold, which adds thousands of dollars to tooling costs and makes maintenance way more complicated. Even with collapsible molds, you’re limited on how sharp or deep those undercuts can be. And don’t even try to make parts with thin necks and thick bodies—EB struggles with that balance, because the parison will stretch unevenly, leading to weak spots.
Wait, let’s not forget material restrictions, either. Extrusion blowing is mostly limited to thermoplastics—HDPE, PP, PVC, PET, that’s pretty much it. You can’t use things like polycarbonate for food-grade containers easily, or engineering plastics for high-heat industrial parts, because they don’t melt consistently through the extruder or stretch well into the mold. I had a client that wanted to make heat-resistant plastic mugs for a café chain, and EB wasn’t the right fit because the only thermoplastic that can handle 200°F is PP, but PP doesn’t get the clear finish they wanted. So they had to go with injection molding instead, which added $20k to their initial tooling costs. Also, some resins have really short shelf lives once they’re exposed to moisture, like PET—if you leave it sitting around too long before running it through the EB machine, it can absorb moisture and cause bubbles in the finished part. That means you either have to dry the resin for 4-6 hours before use, which takes time and energy, or use it all within a week. I’ve seen clients waste $3k worth of PET because they forgot to dry it, and half the parts came out pocked with bubbles.
Another big one: size and space constraints. A lot of small shop owners don’t measure their floor space before buying an EB machine. Mid-sized to large EB machines are huge—like, 20 to 30 feet long, 10 feet wide. That means you need a dedicated, unobstructed space for it, plus room for the mold changers, material hoppers, and cooling systems. I had a guy a year ago that bought a used EB machine thinking he could fit it in his existing shop space, and ended up having to move his entire production line to a new building just to make room—cost him $80k in relocation and downtime. Even small desktop EB machines for prototype work are 6 feet long, so they’re not exactly portable, and if you ever need to move it for an expansion or to a new location, you’re looking at heavy rigging fees. Also, ceiling height matters too—big machines need 12 to 15 foot ceilings, otherwise you can’t mount the extruder properly and the parison will hit the ceiling.
Wait, I should also mention quality control headaches, especially for high-volume runs. With extrusion blowing, every cycle has a lot of variables: temperature, pressure, parison speed, cooling time. Even small fluctuations can lead to bad parts. I’ve had clients that run 10,000 parts a day, and 2-3% of them are defective, which doesn’t sound like a lot until you multiply that by the cost per part—for a 1-gallon jug, that’s $0.15 per defective part, so $450 a day wasted. The worst part? A lot of these defects (like warping, thickness variations, leaks) don’t show up until a day or two after production, when the part cools and settles. So you might run a full shift, pack up all the parts, and then realize half of them are trash. That means reworking or scrapping them, which adds even more labor and material costs. And if you’re making parts for a regulated industry—like food or medical packaging—you need constant documentation of every cycle, every temperature, every adjustment. That means adding extra QC staff, or investing in software to track all that data, which is another overhead cost most new operators don’t plan for.
Let me wrap this up, because I know I’ve rambled a bit, but here’s the thing: I don’t say all this to scare you away from extrusion blowing machines. They’re still the best option for a ton of applications—high-volume bottles, drums, toys, stuff that needs uniform hollow parts at a low per-part cost. But buying one isn’t just about the machine price tag. You’ve gotta factor in changeover waste, training, maintenance, tooling costs, floor space, and material restrictions. If you’re just starting out with small batches or custom, low-volume parts, EB might not be the right call for you right now.

If you’re currently using an EB machine, or thinking about adding one to your line, I’m here to help. I’ve worked with hundreds of shops, from tiny startups to big manufacturers, and I can walk you through exactly what to plan for, how to cut downtime, and which machine size fits your production needs. Don’t waste your time or money on a machine that’s gonna eat into your margins—hit me up when you’re ready to chat about your specific project, and we can figure out if extrusion blowing is the move for you. No pressure, no hard sell, just real talk from someone who’s been in this game long enough to know the good, the bad, and the ugly of these machines.
References
Extrusion Blowing Machine Plastics Technology Magazine. (2022). "Extrusion Blow Molding: Process Fundamentals and Modern Advancements." SME Resource Center.
American Chemistry Council. (2021). "Energy Use in Plastic Manufacturing: Extrusion Blow Molding Facility Data."
Society of Plastics Engineers. (2023). "Operator Skill Gaps in Advanced Plastics Manufacturing Processes: Industry Survey."
Shenzhou Machinery Co., Ltd.
As one of the most professional extrusion blowing machine manufacturers and suppliers in China, we’re featured by quality products and good price. Please feel free to buy advanced extrusion blowing machine made in China here from our factory. We also accept customized orders.
Address: Fenghuang Town, Zhangjiagang City, Jiangsu Province, P.R.China
E-mail: sale@shenzhoumac.com
WebSite: https://www.shen-zhoumachinery.com/